喷淋液滴在空气环境下的运动特性

本文以喷淋液滴在空气环境下运动特性为工程背景，建立单个液滴在常温、常压空气环境中的动量方程，分析液滴沉降特性、追赶特性及运动轨迹行为。计算结果表明，不同喷淋液滴初始条件下，短时间内存在重力大于曳力和重力小于曳力两种情况，但最终减速液滴均会达到受力平衡状态；液滴离开喷淋头后，垂向位移均迅速增大，液滴粒径越大、初始速度越大，垂向位移增长的速率也越大，达到相同位移的用时越短；液滴尺寸、初始速度相差越大，液滴追赶所用的时间越短，追赶位移越小，液滴尺寸、初始速度越接近，液滴追赶所用的时间越长，追赶位移越大；液滴初始速度越大、初始直径越大、喷射角度越大，横向速度消失越慢，达到的横向位移越大，喷射液滴覆盖的面积也越大。计算结果有助于优化工程实际中喷淋系统的设计与布置。     

A review on ultrasonic spot welding of copper alloys

As a solid state joining process, ultrasonic spot welding has been proven to be a promising technique for joining copper alloys. However, challenges still remain in employing ultrasonic spot welding to join copper alloys. This article comprehensively reviews the current state of ultrasonic spot welding of copper alloys with a number of critical issues including materials flow, plastic deformation, temperature distribution, vibration, relative motion, vertical displacement, interface friction coefficient, online monitoring technique, coupled with the macrostructure and microstructure, the mechanical properties and electrical conductivity. In addition, the future trends in this field are provided.     

A stiffness parameter and truncation error criterion for adaptive path following in structural mechanics

We explore a truncation error criterion to steer adaptive step length refinement and coarsening in incremental-iterative path following procedures, applied to problems in large-deformation structural mechanics. Elaborating on ideas proposed by Bergan and collaborators in the 1970s, we first describe an easily computable scalar stiffness parameter whose sign and rate of change provide reliable information on the local behavior and complexity of the equilibrium path. We then derive a simple scaling law that adaptively adjusts the length of the next step based on the rate of change of the stiffness parameter at previous points on the path. We show that this scaling is equivalent to keeping a local truncation error constant in each step. We demonstrate with numerical examples that our adaptive method follows a path with a significantly reduced number of points compared to an analysis with uniform step length of the same fidelity level. A comparison with Abaqus illustrates that the truncation error criterion effectively concentrates points around the smallest-scale features of the path, which is generally not possible with automatic incrementation solely based on local convergence properties.     

宽带数字接收机IQ不平衡估计与自适应补偿算法

针对宽带调制解调技术中广泛存在的IQ不平衡问题,在IQ不平衡模型及补偿原理的分析基础上提出了一种宽带数字接收机IQ不平衡估计与自适应补偿算法。首先利用解调数据对IQ不平衡参数进行实时估计,然后利用估计参数对接收信号进行自适应补偿。实验结果表明,所提算法可以有效解决宽带调制解调系统中普遍存在的IQ不平衡问题,提升系统误码性能。     

Estimating epidemic coupling between populations from the time to invasion

Identifying the mechanisms by which diseases spread among populations is important for understanding and forecasting patterns of epidemics and pandemics. Estimating transmission coupling among populations is challenging because transmission events are difficult to observe in practice, and connectivity among populations is often obscured by local disease dynamics. We consider the common situation in which an epidemic is seeded in one population and later spreads to a second population. We present a method for estimating transmission coupling between the two populations, assuming they can be modelled as susceptible–infected–removed (SIR) systems. We show that the strength of coupling between the two populations can be estimated from the time taken for the disease to invade the second population. Confidence in the estimate is low if only a single invasion event has been observed, but is substantially improved if numerous independent invasion events are observed. Our analysis of this simplest, idealized scenario represents a first step toward developing and verifying methods for estimating epidemic coupling among populations in an ever-more-connected global human population.     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

Analysis and improvement of the influence of sample shape on Pu measurement results

ABSTRACT

The analysis method of Fast Neutron Multiplicity Counting (FNMC) plays an increasingly important role in the measurement of nuclear material properties. Based on the assumption of point model, fast neutron multiplicity measurement equation is derived which can be used to measure the mass of Pu sample. However, the deviation of the simulated measurement of 1 kg Pu sample reaches 16.6% and increases with mass. Because nonpoint source samples of different shapes do not fully satify the hypothesis. To correct this deviation, a set of fast neutron multiplicity counters was built by Geant4 to simulate and study the mass attribute of Pu samples.The cylindrical sources of different shapes and different masses were simulated, the self-multiplication factor and α coefficient were corrected.And the corresponding third-order polynomial fitting equation was obtained, the goodness of fit was greater than 0.970. In the same way, the spherical and spherical shell source samples in the mass range of 0–5 kg were analyzed, the corrected mass deviation of samples was less than 10% in this interval. The results show that the combination of the fast neutron multiplicity counter and parameter correction can accurately measure the sample mass attribute.     

Tailoring electromagnetic absorption performances of TiO2/Co/carbon nanofibers through tuning graphitization degrees

Low density, high stability and strong dielectric loss capacity endow carbon-based nanocomposites with superb microwave dissipation performances. Different from grapheme or carbon nanotubes, the graphitization degrees of carbon-based composites derived from the organic precursor pyrolysis can be accurately regulated by controlling the carbonization temperature. As such, their electromagnetic properties can be easily tuned. In this work, we report the preparation of TiO₂/Co/Carbon nanofibers (CNFs) through a combined approach of electrospun and carbonization at different temperatures. The nanofibers with an average diameter of 300 nm were coated by a dense layer of TiO₂ and embedded by Co/CoO nanoparticles. The performance evaluation indicated the composite obtained at 700 °C exhibits remarkably strong absorption of −63.2 dB at 9.8 GHz and wide effective absorption bandwidth of 6.4 GHz with a pretty low filling rate of 15 wt%. Further analysis on the electromagnetic behaviors shows that the composite possesses regulable impedance matching characteristic and absorption performances, implying the huge application potential under various demand conditions.     

Relationships between the accumulative damage and dielectric properties of woven BN-coated Hi-Nicalon™ SiC fibre-reinforced SiC matrix composites

The accumulative damage behaviour of BN-coated Hi-Nicalon™ SiC fibre-reinforced SiC matrix composite was examined under tensile cyclic loading at room and elevated temperatures. The accumulative damage occurring during the cyclic loading was quantitatively characterised using the damage parameter obtained by the hysteresis loop curves. The damage parameter increased with increasing applied stress beyond the matrix cracking stress, and it subsequently retained a nearly constant value until just before fracture. Moreover, the dielectric constant, dielectric loss and loss tangent of the composite were measured before and after the fracture in the frequency range 1–1000 MHz. The dielectric properties had similar frequency dependency before and after the fracture. However, the dielectric constant, dielectric loss and loss tangent were lower in the post-fractured specimens than in the pristine ones. The reduction of the dielectric properties was associated with the accumulative damage stored in the specimens. In addition, the relationships between the dielectric properties and the damage parameter were described in detail.     

An investigation of energy loss mechanisms in water-jet assisted underwater laser cutting process using an analytical model

The water-jet assisted underwater laser cutting processes has relatively low overall efficiency compared to gas assisted laser cutting process due to high convective loss in water-jet from the hot melt layer and scattering loss of laser radiation by the water vapour formed at the laser–workpiece–water interaction region. However, the individual contribution of different losses and their dependency on process parameters are not fully investigated. Therefore, a lumped parameter analytical model for this cutting process has been formulated considering various laser–material–water interaction phenomena, different loss mechanisms and shear force provided by the water-jet, and has been used to predict various output parameters including the maximum cutting speed, cut front temperature, cut kerf and the loss of laser power through different mechanisms as functions of laser power and water-jet speed. The predictions of cutting speed, kerf-width and cut front temperature were validated with the experimental results. The modeling revealed that the scattering in water vapour is the dominant loss mechanism, causing ~40–50% of laser power loss. This also predicted that the percentage losses are lower for higher laser powers and lower water-jet speeds. In order to minimize the deleterious effect of vapour, dynamics of its formation due to laser heating and its removal by water-jet was experimentally studied. And, the cutting was done with modulated power laser beam of different pulse on- and off-times to determine the pulse on-time sufficiently short to disallow growth of vapour layer, still cutting be effected and the off-time enough long for water-jet to remove the vapour layer from the interaction zone before next pulse arrives. Compared to CW laser beam the modulated laser beam of same average power yielded higher process efficiency.